Esato Mobile
Sony Ericsson / Sony : UMTS / 3G : Here's how to open the housing of the V800 (Lots of Pictures)
> New Topic
> Reply
< Esato Forum Index > Sony Ericsson / Sony > UMTS / 3G > Here's how to open the housing of the V800 (Lots of Pictures) Bookmark topic
Page <  1234>

scotsboyuk Posts: > 500

@campbellnz

Check your pm.
--
Posted: 2005-07-05 16:54:00
Edit : Quote

vanquish Posts: > 500

Scots! Stop telling everyone off

v good review! fantastic, campellnz, people were so amazed at it that they didnt have time to reply!

its really good, well done
--
Posted: 2005-07-05 17:03:59
Edit : Quote

godmitch Posts: 10

my little white antenna cable has bust anyone know where i can get a replacement
--
Posted: 2005-07-12 11:01:22
Edit : Quote

djpowelly Posts: > 500

If its a weire, just get a bit of multi/single core?
--
Posted: 2005-07-12 14:23:07
Edit : Quote

Volfeed Posts: 2

I also had the same problem..

Anyway, found in a forum that someone has got his phone fixed. Seems like the antenna cable was the culprit.

http://secentral.net/forum/index.php?topic=8427.0

If you are able to change the cable would you tell us the results?
--
Posted: 2005-07-31 02:53:17
Edit : Quote

godmitch Posts: 10

i really need to get hold of a cable for the antenna can anyone help sony ericsson wont repair it all i need is 1 dam little white tiny cable lol

--
Posted: 2005-08-10 17:39:14
Edit : Quote

campbellnz Posts: 14

@godmitch: Just sent an email to the german site listed in my first post. I will let you know if they reply to me. They used to have that part listed but I dont see it there anymore. Seems very strange that that sould be the part that fails.... oh well.
--
Posted: 2005-08-11 06:05:44
Edit : Quote

Volfeed Posts: 2

Just got my antenna & its cable changed at a local SonyEricsson service centre. Problem solved and costed me about US$30.
--
Posted: 2005-08-18 16:14:06
Edit : Quote

kennybanh Posts: 5

after i changed full housing for my phone , it does not work . When i turn power on , the screen Appear the text SONY ERICSSON , and after that , the screen turn off (black screen , no light) but the small screen outside still work , look like my phone alway close , the small lcd screen outside alway on . Everybody help !!!! help me how to fix it , pls ( 420 usd )
--
Posted: 2005-08-20 09:52:00
Edit : Quote

campbellnz Posts: 14

Quote:
On 2005-08-20 09:52:00, kennybanh wrote:
after i changed full housing for my phone , it does not work . When i turn power on , the screen Appear the text SONY ERICSSON , and after that , the screen turn off (black screen , no light) but the small screen outside still work , look like my phone alway close , the small lcd screen outside alway on . Everybody help !!!! help me how to fix it , pls ( 420 usd )



There is a little magnetic sensor inside your phone on the main circuit board in the top left corner. If the sensor detects a magnet it turns of your main screen and turns on the external one. Some phone covers have a magnet that causes the sensor to think the phone is closed thus the main screen gets turned off. Hope this helps.
--
Posted: 2005-08-20 14:47:49
Edit : Quote
Page <  1234>

New Topic   Reply
Forum Index

Esato home