Esato Mobile
Sony Ericsson / Sony : UMTS / 3G : V800 - No signal when closed, full signal when opened
> New Topic
> Reply
< Esato Forum Index > Sony Ericsson / Sony > UMTS / 3G > V800 - No signal when closed, full signal when opened Bookmark topic
Page123>

Temanga Posts: 2

Hi

Very new to this forum, so I hope I can get some good answers!

Currently using an unlocked V800 (Vodafone) in the US with a T-Mobile PAYG SIM. Phone was working fine, but now exhibits peculiar behaviour.....when the handset is open, signal strength shows 5 full bars. However, close the handset, and the signal strength rapidly decays to 1 bar, and sometimes "No access to network" or "Emergency calls only." Worryingly, when I went back to the UK last week for a business trip, this behaviour seemed to happen with the Voda3G SIM card too.

Any thoughts? I've got RD1 (?) firmware. Should I try and upgrade it (even though I think I left the cable in the UK.... ).

Or....does anyone know a decent SE dealership in Manhattan that could give it a once-over?

Cheers......Temanga.
--
Posted: 2005-06-06 17:19:46
Edit : Quote

Pallister Posts: > 500

Keep your phone open and not closed:-). Kidding aside, i think a firmware upgrade will sort your problems. Worth giving it a try. This message was posted from a WAP device
--
Posted: 2005-06-06 17:25:04
Edit : Quote

Sammy_boy Posts: > 500

Sounds a bit like a possible hardware problem too, the way the signal disappears when you close the phone, I wonder if something like a data ribbon that carries info from one part of the phone to the other has come loose or something?
--
Posted: 2005-06-06 18:36:35
Edit : Quote

Strider420 Posts: 112

OK I know exactly what you are talking about. The EXACT SAME THING has happened to me and it is indeed a HARDWARE problem.

Please refer to these threads for my experiences with this issue:

http://www.esato.com/board/viewtopic.php?topic=84845&start=0

http://www.howardforums.com/showthread.php?t=627652

http://www.mobile-files.com/forum/showthread.php?t=5564

My issue has not been solved yet so I'll keep you posted.
--
Posted: 2005-06-06 20:45:53
Edit : Quote

BobaFett Posts: > 500

welcome here. i do noticed it on z10, that at flip closed and opened different rec, howver i always have rec. the difference is, that at flip open 5 bars, flip closed 3 or 4 bars. guess its a fw bug, let it check in a service, visit se web for tel nrs in your aera. good luck
--
Posted: 2005-06-07 00:12:07
Edit : Quote

nsx280ps Posts: 20

if you read chinese, there are posts on mobile01.com that got the issue solved...

basically u need to open up the fone since the antenna is loose
--
Posted: 2005-06-07 00:14:51
Edit : Quote

BobaFett Posts: > 500

thats the solution? sounds pretty weird for me...
--
Posted: 2005-06-08 00:09:49
Edit : Quote

Matteus Posts: 372

Also my z1010 had 5 bars flip open and 2 bars flip closed. But i put an antenna booster under the battery and now the bars are the same. This message was posted from a Z1010
--
Posted: 2005-06-08 01:04:52
Edit : Quote

BobaFett Posts: > 500

do u have better batt performance with it aswell?
--
Posted: 2005-06-08 02:25:52
Edit : Quote

Matteus Posts: 372

The difference is marginal i think maybe a bit better in 2G and 900MHz regions. This message was posted from a Z1010
--
Posted: 2005-06-08 02:33:30
Edit : Quote
Page123>

New Topic   Reply
Forum Index

Esato home