Sony Ericsson / Sony : Software, Firmware and Drivers : Raider camera driver for K790, K800 and K810 (v6.6.5)
>
New Topic
>
Reply<
Esato Forum Index
>
Sony Ericsson / Sony >
Software, Firmware and Drivers
> Raider camera driver for K790, K800 and K810 (v6.6.5)
Bookmark topic
[quote]
On 2008-05-29 19:18:25, Raiderski wrote:
sacirxposed
this is your M2 problem. if you're trying to say that driver is source of this problem than relax - it's not. driver don't have access to file I/O operations on your memory. I have 2GB M2, photo counter is ~4000 without any problems
Well I havent this problems when I use Withan or some other camdriver, Im think this is a camdriver problem
I have take 10 pics with super camdriver and 3 pics are like this I send to you, but with withan I never have this problems
--
Posted: 2008-05-29 19:22:51
Edit :
Quote
erm... small bro of k800.. the k810 can use also? this topic k790 and k800... @@
EDIT= oh can use... download and i readed readme files.. ^^
[ This Message was edited by: eddie2020 on 2008-05-29 18:27 ]
--
Posted: 2008-05-29 19:26:36
Edit :
Quote
The Best super, mega giga driver will be if super camdriver and withan become one driver
Withan V3 + all settings from Super camdriver = Extra super camdriver
--
Posted: 2008-05-29 19:34:03
Edit :
Quote
Finally
--
Posted: 2008-05-29 19:41:40
Edit :
Quote
On 2008-05-29 19:18:25, Raiderski wrote:
ohh, that's simple:
1. ISO value is used in AutoExposure calculations
2. calculated AE value is then used by driver to check if flash fire is needed
if we are in a dark place automatic ISO is high. if we manually set ISO to low value then calculated AE value will be high (which means good light but it's not true). in this case driver will say: good light? fine! there will be no flash fire
there is a simple solution to fix this (added to my "to do" list)
Right!
That's why I hate the "check if flash needed" procedure! I don't want a stupid algorithm to decide for me
We need this fix and the forced flash addon
--
Posted: 2008-05-29 19:42:24
Edit :
Quote
sacirxposed
as I wrote I never had problems, my friend also (~3000 photos with this driver). maybe something went wrong while connecting phone to PC
did you used any settings like 2sec shutter speed or EM?
--
Posted: 2008-05-29 19:43:52
Edit :
Quote
just manual focus for one picture and colour saturation for other pictures....
--
Posted: 2008-05-29 19:48:30
Edit :
Quote
sacirxposed
so, it's not driver fault. all I can do is to corrupt jpeg header with wrong snapshot sequence, of course this doesn't happening in released version
--
Posted: 2008-05-29 20:07:12
Edit :
Quote
why is the EM code for k800i so comicated not like the k750/w800 em code which was quite simple i could get you em code to work in my driver.
I like the way you improved the AF it's alot faster than it was, would it be a better idea be to use #COM_EVENT(03,xx) for EM mode then you can have something like 1/2 sec shutter iso 200 and with #COM_EVENT(03,xx) it can calculate the exposure time itself it only needs to be seperated from the autofocus i tried a few things myself putting #COM_EVENT(03,0f) at the start of seq_set_prop_a runs the af at a minium of 7,5fps but still effects the shutter speed just need to find a way to update #COM_EVENT(03,xx) at the end of focusing or something.
--
Posted: 2008-05-29 20:19:16
Edit :
Quote
its too pro like
... i'll wait for shitty newbie pics patch and maybe i'll try later
i will try it... still dont know the meaning of iso speed and stuff. got read.
anyway, thank you for all u'r great work.
--
Posted: 2008-05-29 21:26:44
Edit :
Quote
New Topic
Reply
